MAGICARD RIO PRO OUT OF DYE FILM

The image can also be rotated degrees in the driver’s Printing Preferences. Are the cards feeding out of the hopper? Depending on which Rio model you have Rio, Rio 2, Rio2e, or Rio Pro , different printhead assemblies are available as a field replaceable unit. On the Rio, Rio 2, and Rio 2e, push the small button on the rear of the printer with the lid closed, and dye film fitted. Also, if you are printing very dense images, try selecting ‘ColorSure’ mode in the printing preferences, Try reducing the YMC printhead power in printing preferences. The warranty status can be checked here; http:

They are normally White, and usually very thin just a few pixels wide. The grub screw on the pulley can sometimes come loose 1. Apr 14, Magicard Rio Card Printer. Later models were Rio 2, Rio 2e, and currently the Rio Pro. The image can also be rotated degrees in the driver’s Printing Preferences. I hope the above helps!

Posted on Jan 02, Not finding what you are looking for? Instant Repair Help over the Phone 6ya. The advice below may help others with the same issue though. Make sure the other pinch rollers are really clean. Posted by Anonymous on Magciard 09, Check that the ends of the pinch roller shafts are retained in the plastic cam followers. Send us an email to; support magicard. Are the cards iro when you click on ‘OK’?

Magicard rio 2e error out of dye film but i have film in it – Fixya

The email address entered is already associated to an account. Depending on which Rio model you have Rio, Rio 2, Rio2e, or Rio Prodifferent printhead assemblies are available mwgicard a field replaceable unit. Your printer neds to be cleaned using a cleaning kit every time you cahnge dye film to maintain a top quality print. Sep 29, Magicard Rio Card Printer.

  K3 EN DE MAGISCHE MEDAILLON FILM

Have you cleaned the printer using a Magicard cleaning kit? Lately during the filling cycle water hammer is occurring. Are the cards feeding out of the hopper? Helpful 1 Not Helpful Flag. Login to post Please use English characters only. Tell us some more! The most common reason for the dye film sticking to the cards are if they already have overcoat printed on them you can not print over overcoat.

Ask a Question Usually answered in minutes! It should look like ?? Check the front pinch rollers on the thin metal shafts are pulled down onto the cards by their springs. If there is a loose connection, the card sensor always shows as blocked hence the error You should feel no play.

Check that there are no cards jammed near the front of the printer just before the flipper unit. You can download this here; http: Check that none of the dye film clips are broken.

There were several Rio models. Initially turning the machine on an off resolved the issue but it is now continually reporting the flipper jam. The grub screw on the pulley can sometimes come loose 1.

You can’t post conmments that contain an email address. You can’t post answers that contain an email address. This will cause card mis-registration you will see feathered edges or a blurry effect. If it turns then you will need to tighten the small grub screw which attaches the gog to the motor shaft.

On the Rio, Rio 2, and Rio 2e, push the small button on the rear of the printer with the lid closed, and dye film fitted. The warranty status can be checked here; http: Is the film actually moving? In the case of a damaged scratched printhead, oit lines always run magicqrd the cards longest length landscapeand are always in exactly the same place.

  FOTO PEMAIN FILM BRAMA KUMBARA INDOSIAR

You can buy it from your Magicard approved dealer or contact Magicard directly who will direct you to a dealer – info magicard. Feb 15, Magicard Rio Card Printer. Are any of the dye film panels printed before the card gets stuck? Click “Add” to insert your video.

Global contacts

Does your serial number end with NP? If you are updating to a later driver version, please magicar sure you choose ‘Update driver files’ rather than ‘Add a printer when give the choice you will need to restart your PC. Helpful 0 Not Helpful Flag.

Exactly which model do you have? The image can also be rotated degrees in the driver’s Printing Preferences.

Level 2 Expert 70 Answers. Posted on Feb 17, Want Answer 0 Clicking this will make more experts see the question and we will remind you when it gets answered. This will help identify the cause.

You can move the print roller round with your finger quite easily. When the ribbon snapped, did the printer report and ‘Out of dye film’ error on the PC via the Status Monitor?